As a car user who recently bought a 4L60E automatic transmission for your vehicle but it won’t move, no matter how you shift the gear, what can you do?
This is a common mechanical problem that could be easily solved when you know what to do. These problems could be caused by many things and this article will elucidate some of the possible problems and solutions which could help you.
Pump failure
Pump failure remains the most common problem that can affect the 4L60E transmission. Some symptoms to confirm that pump failure is responsible for your transmission issues is there is a noticeable burnt odor around the transmission.
This happens because when the pump is bad there isn’t enough circulation. The best way to solve pump failure is to put off the engine and check the level of fluid. If you notice unusual or short fluids, then it means your pump has spoilt. Your best bet is to replace the pump with a better part.
Total loss of transmission fluid
For your transmission to function properly your transmission fluid must flow well, if there is an apparent leak, then you will notice fluids escaping from your transmission. This can cause problems in several ways because your gears might not move and also, there might be gear slippage and other mechanical issues.
To solve this problem, you will need to check your transmission for traces of leaks and once you can identify them, you will need to refill them with appropriate fluids. However, before refilling the transmission make sure you repair the leaks irrespective of the extent of the damage.
If you notice that your transmission leaks are red, your repair is easier than expected. Also, sometimes, it is just about fluids leaking, but a gasket might be lost, which you can easily replace.
Excessive transmission fluid
Transmission fluids are complicated substances and they can cause critical problems for your transmissions. Having too many transmission fluids in your car can affect the transmission range which can cause your 4l60e transmission to falter.
The solution to this is to remove some transmission fluid which will revert your transmission fluid to the default settings. To do this, you will open the transmission and remove the excessive fluid till you reach your desired level.
Ensure that you wear safety gloves and the required precautions so that you won’t mistakenly inhale or ingest the fluid. Removing the fluid isn’t easy, but it is essential to avoid further problems.
Incorrect placement of torque converter
If your torque converter isn’t seated properly, it could harm your 4l60e automatic transmission and affect its performance. This can be caused by inexperienced drivers or mechanics who aren’t used to fixing an automatic transmission.
Solving this problem entails opening everything and reinstalling the torque converter. You will need to pull the torque converter till it’s seated properly in your car.
A buzzing or humming noise
When there is a persistent noise from the transmission, it is primarily caused by faulty beating, gears issues, and other mechanical faults. This bus could be from a faulty internal sealing surface, low transmission, or other problems.
To solve this buzzing problem, look for the exact location of the clunking noise and immediately repair or change the source of the noise.
When your car doesn’t have power
When your vehicle has little or no power and the engine is working correctly, this could mean the 4L60E transmission has problems. Asides from the transmission issues, the brakes could be affected which can spread to a faulty caliper or hose which limits your car power.
You will need to check your vehicle codes to solve these problems. It isn’t a solution you can solve yourself, you will need to contact a technician conversant with car systems and software.
Engine light and overdrive light issues
Engine lights in cars aren’t dedicated to engines alone. You can use the light engine situation to decide if there is a problem with the transmission. Some problems that could arise from these are, solenoids, overheating, speed sensors, and slipping transmission.
Kindly get the trouble codes checked to know what exactly is the problem and which circuits are causing the problems. Though not all sensors might be bad, you will need to check them individually to know which ones are causing the problem.
Conclusion
It is a common issue among car users that their 4l60e transmission won’t move into gear which might result in many problems. Identifying the problem is important to avoid further problems or accidents.
After identifying the problems associated with the 4L60E transmission as we have stated above, getting the right solution is vital to the well-being of your vehicle.